Industrial control systems

Control panels engineered to run the plant.

Dedicated Panel Building designs and builds industrial control panels, integrates PLC and HMI systems, and runs repeat production builds — wired, labeled, tested, and delivered with the documentation your electricians actually need.

UL 508A Panel Manufacturer
FIG. 01
Interior of a wired industrial control panel with PLC rack, wire ducts, and terminal blocks

PLC rack — point-to-point wired

01Custom builds
02PLC & HMI
03Volume runs
Capabilities

Three disciplines, one shop floor.

Design, fabrication, and programming stay under one roof, so nobody is waiting on a vendor to answer for the other.

UL 508A Panel Manufacturer

Panels are designed, built, and labeled to the UL 508A standard for industrial control equipment, so your build passes inspection the first time.

Start a project
Panel · DPB-100energized
Power
Run
Fault
Network
Ammeter0.0 A

Click power, start, mode, and e-stop — the meters and lights respond.

01

Custom control panels

Built from your prints or ours. Enclosure selection, power distribution, drives, safety circuits, operator devices, and every conductor in between — point-to-point tested before it ships.

  • Single machines to multi-section lineups
  • NEMA 1 through 4X and stainless enclosures
  • Schematics, layouts, and BOM produced in-house
02

PLC & HMI integration

Programming, screen development, and commissioning. Operators get screens built for gloved hands and fast changeovers; maintenance gets logic and tagging they can troubleshoot.

  • PLC, HMI, and drive programming
  • Ethernet/IP, Modbus, and Profinet networks
  • Simulation and factory acceptance testing
03

Mass production panel runs

Repeat builds at volume with a locked revision, dedicated fixtures, and the same test procedure on every unit. Panel 200 is built to the same print as panel 1.

  • Scheduled releases against your forecast
  • Serialized test record per unit
  • Kitting and drop-ship options
Mass production runs

Volume without variation.

When your program scales past a handful of machines, consistency becomes the whole job. We set up a repeatable cell around your build — one revision, one component list, one test procedure — and run it on a schedule that matches your line.

01

Locked build revision

The bill of materials and drawings freeze once the run is approved. Changes are logged and quoted, never absorbed quietly mid-run.

02

Dedicated fixtures & harnesses

Pre-cut wire, formed harnesses, and drill fixtures cut build time and close the gap between unit one and unit two hundred.

03

Test record per unit

Every panel is point-to-point checked and powered up, with a serialized test record kept against its serial number.

04

Release scheduling

Weekly or monthly releases against your forecast, with kitting and drop-ship options so panels arrive when your line needs them.

FIG. 02
Rows of identical stainless steel control panel enclosures on a production floor

Production floor — repeat build cell

Process

A build you can follow at every stage.

Four checkpoints, each with something you can review. No black box between the purchase order and the loading dock.

  1. 01

    Scope & review

    Send drawings, a functional spec, or a rough sketch. We review the application and come back with questions instead of assumptions.

  2. 02

    Engineering

    Schematics, panel layout, bill of materials, and a control narrative — issued for your approval before anything is cut or ordered.

  3. 03

    Build & test

    Fabrication, wiring, labeling, and point-to-point verification. Every panel is powered up and exercised before it is crated.

  4. 04

    Delivery & support

    Shipped on the agreed date with the full documentation package, plus commissioning support and spares when you need them.

Applications

Built for the floor, not the showroom.

The environments are hard on equipment. Everything we build is specified for the conditions it actually runs in.

Material handling

Sortation, accumulation, and conveyor controls for distribution and warehouse lines.

Water & wastewater

Pump and lift station controls, treatment process panels, and remote monitoring.

Food & beverage

Washdown-rated enclosures, sanitary process control, and clean-in-place sequences.

Machine builders & OEMs

Repeat builds to your print, on your release schedule, shipped under your brand.

Energy & utilities

Power distribution, generator and standby controls, and electrical monitoring.

Agriculture & grain

Dryers, elevators, aeration, and material handling controls for demanding environments.

Handover

Every panel leaves documented.

Handover isn’t a folder of drawings. It’s a package your electricians can wire from and your maintenance team can troubleshoot with — on the first call, not the third.

  • As-built schematics and panel layouts
  • Bill of materials with manufacturer part numbers
  • Wire numbers and terminal labels on every conductor
  • Point-to-point test record
  • Spare parts list and recommended spares
  • PLC program and HMI project files archived
Request a quote

Tell us what it has to do.

Send the application, quantity, and timeline. We'll come back with scope, price, and lead time — and flag anything in the spec that will cost you later.

What helps us quote fast

  • Drawings, an I/O list, or a functional description
  • Enclosure type and the environment it lives in
  • Quantity and release schedule
  • Target install or production date

Not sure what to specify?

Ask the Panel Advisor for engineering recommendations before you submit.

Panel advisor

Describe your application and ask anything about enclosures, PLC/HMI selection, voltage, or UL 508A. You'll get engineering recommendations before you fill out the form.

No sales sequence. A real reply.